How to Prepare for Mathematics for GATE-2018


Mathematics is an important subject for securing a good rank in GATE exam. If you see the statistics, you will note that every year around five questions are asked form Mathematics. Marks wise it will stand around 12. So once can secure his/her 12 marks by just preparing Mathematics.



There are three sections where math is asked. One in Aptitude Section (1 Question Carrying one marks and 1 Question of two marks), Section-1 (carrying one marks) and Section-2 (Carrying two marks). The math question coming in Aptitude question is quite simple and can be solved by having a good knowledge of mathematics up to class 12. It does not need any special preparation to solve mathematics question of Aptitude Section. Please have a look at some of the mathematics Questions from previous year in Aptitude Section.


Year 2015:

1 Marks:


2 Marks:


Year 2014:

1 Marks Question:


2 Marks Questions:


It is clear that the above two questions are simple can easily be solved using elementary knowledge of Mathematics.

Mind that every year one question from Maxima Minima comes for sure. So be ready to grab the marks for that Maxima Minima question without giving special attention.
Now, we will discuss about the main sections i.e. Section-1 and Section-2. For main sections you need to prepare for mathematics and that too in very selective manner. If you observe the previous year question paper, you will notice that question from a particular section comes like they are from Fourier Transform, Z-Transform, Integration (Line, Surface and Volume) etc.

Thus special attention needs to be given on these topics. I will suggest you to go through the whole mathematics as the syllabus is very short for mathematics while the marks for math question is handsome. You are going to get 12-15 marks just by going through few topics like Integration, Maxima Minima, Rolls and Lagranges Mean Value Theorem, Fourier Transform, Z-Transform etc.

Made Easy Study material for Mathematics is quite good and the best part of it is that it is very precise and can be complete fast. Please download the Study Material for Maths from the link below and start you preparation. Mind that don’t waste your much time on a single paper rather be smart and finish it within specified time say 10 days and practice as much as you can do.

Download Mathematics Study Material for GATE-2017.

All the Best!!!


Comments

Post a Comment

Popular posts from this blog

Concept of Subtransient, Transient & Steady State

Image
The concept of Subtransient, Transient and Steady State arises in case of fault in an Alternator. Let us assume a sudden short circuit in three phase of alternator. The fault current will flow in all the three phases of alternator and its waveform will be as shown in figure below. When the alternator is short-circuited, the currents in all the three-phases rise rapidly to a high value of about 10 to 18 times of full load current, during the first quarter cycle. The flux crossing the air gap is large during a first couple of cycles. The reactance during these first two or three cycle is least and the short circuit current is high. This reactance is called subtransient reactance and is denoted by X". The first few cycles come under sub-transient state. After a first few cycles, the decrement in the r.m.s. value of short circuit current is less rapid than the decrements during the first few cycles. This state is called the Transient  State and the reactance in th...
Read more

Open Circuit and Short Circuit Characteristics of Synchronous Machine

Image
Open Circuit Test and Short Circuit Test are performed on a Synchronous Machine to find out the parameters of Synchronous Machine and hence to have an idea of their performance.  Open Circuit Test of Synchronous Machine is also called No Load, Saturation or Magnetizing Characteristics for the reason which will be clear after going through the post. For getting the Open Circuit Characteristics of Synchronous Machine, the alternator is first driven at its rated speed and the open terminal voltage i.e. voltage across the armature terminal is noted by varying the field current. Thus Open Circuit Characteristic or OCC is basically the plot between the armature terminal voltage E f versus field current I f while keeping the speed of rotor at rated value. It shall be noted that for OCC, the final value of E f shall be 125% of the rated voltage. Figure below shows the connection diagram for performing the Open Circuit Test of Alternator. As clear from the figure a...
Read more

Transformer Cooling Classes

Image
Losses in the transformer are of the order of 1% of its full load kW rating. There are mainly two types of losses in a Transformer i.e. Core Loss and Ohmic Loss. Because of these losses the winding of transformer as well as Core gets heat up and we need to provide sufficient cooling to remove heat and maintain a constant winding and Core temperature. Various types of cooling methodologies are used for Transformer but before going to each methodology, we will have a look at the General Method of designating a particular cooling method i.e. class. In the nameplate of Transformer, four letter represents the cooling method of the Transformer. The above table is self explanatory, therefore if you see ONAN on the Name Plate of Transformer then it means that Oil with flash point less than 300° is used as cooling media and Natural convection is used for removing heat. In secondary side of cooling mechanism, Air with Natural convection is used by employing Radiator. ...
Read more